Location:HOME > NEWS > Installation of Carbon Steel Pipe Fitting Tee

Installation of Carbon Steel Pipe Fitting Tee

2018-04-04 11:01:54   COMMENT:0 HITS:
  To ensure that the Carbon steel pipe fitting tee is not leaking oil, the placement requirements and detailed problems are as follows:

  Carbon steel pipe fitting tee is manipulated in the actual manipulation according to the normal style and principle, to ensure the quality and price type in the manipulation, and to operate and install according to the normal control standard. No quality and functional problems have occurred. Stainless Steel Tees is not a simple mechanical component in any sense, but an internal mechanical product carrier that has collected abundant technology.

  (1) Carbon steel pipe fitting tee should have sufficient strength and no deformation during fastening. The flange sealing surface should be smooth and clean, resettlement to seriously liquidate oil and rust.

  (2) the gasket should have delicate oil and anti-aging function and good elasticity and mechanical strength. Resettlement shall be made according to the shape of the adjacent section, and the gaskets with different cross sections and dimensions shall be selected and settled.

  (3) Carbon steel pipe fitting tee fastening stress average system, pad compression should be controlled in 1/3 left.

previous_pagefirst_page
next_pageASTM A105 B16.5 Forged Flange Carbon Steel

<ALL>